loading
reading
writing
saving
searching
2018 Hino 258ALP - 25' Flatbed - $30,000 (Anaheim)
Kraemer BLV
2018
Hino 258ALP
QR Code Link to This Post
glow plugs, 6 cylinder, In-line water-cooled; Max Output
260hp @2500rpm; Max Torque 660lb.ft. @ 1500rpm; 7.68L
displacement, 260HP Engine, EPA10 Emissions Certified. Engine block heater (1000W / 120ACV) Oil Capacity - 16.15 quarts Exhaust Brake - Driver controlled w/steering column Stalk
Switch. Fuel Filter - Davco 243 Diesel Pro Heated fuel/water
separator. (Diesel Pro 243) Alternator – Delco 12 volt 130 amp Brush Type.
Radio - AM/FM with single CD, bluetooth, two speakers.Air Conditioning - Denso Cab AC System designed
specifically for Hino - Refrigerant 134A Cab Features - Standard: Cruise control, power steering
with tilt and telescopic steering column, cup holders,
cigarette lighter, coat hook, bag hook, two overhead
compartments, two door pockets, sun visors, side mirrors
(1 flat, 1 convex) each side.
Fuel Tank - Aluminum 50 gallon capacity. Clean CA
position. (drivers side mounted)
GVWR - Gross Vehicle Weight Rating - 25,500 lbs.
Air Tank - Two 34 liter tanks (68L total),(15cfm@1250rpm)
Brakes - Full air dual circuit "S" cam type, leading and
trailing shoes with automatic adjustment and Antilock Brake
System (ABS). Front Brakes: 15.0" diameter x 4.0" x
0.73" thickness: Rear Brakes: 16.5" x 7.0" x 0.85".
Frame - Straight C Channel frame, ladder type, powder
coated, 34" wide, yield strength 80,000 PSI, resistance
bending moment (RBM) 1,031,900 in./lbs. (one side no
reinforcement).
Front Axle - Meritor MFS10, 10,000 lb. capacity, Reverse
Elliot "I" beam oil lubricated hubs.
Rear Axle - Meritor RS19-145, 19,000 lb. capacity,
full-floating single reduction single speed hypoid gearing
Rear Axle Ratio - Standard 4.11
Front Spring: Tapered leaf springs with shock absorbers,
8,000 lb. rating; Rear Spring: Semi-elliptical main, 17,500
lb. rating. Air Suspension - Hendrickson
235" WB / 167.6" CA
Transmission: Auto - Allison 2200RDS w/Syn Fluids (PTO).
w/ FuelSense Basic